FUSO ATW CUSTOM TRAY BUILDS & ACCESSORIES

All Terrain Warriors custom trays are extremely heavy duty yet light in weight. Made from Durgal steel with a 2.5 mm wall thickness which is coated with an epoxy finish.
The tray sheets are made from 5mm cheque or mill finish sheets which are huck riveted to the base frame. This is then finished with the aluminium headboard, sideboards and tailgate all finished in powder coat.
The tray is then mounted by our flexible sprung body mount system to the chassis to allow flex in extreme off-road conditions without placing excess load on the Truck’s chassis rails. 

Single Cab Tray Sizes - 4.2m x 2.2m, 4.4m x 2.2m
Crew Cab Tray Sizes - 3.2m x 2.2m, 3.4 x 2.2m, 3.6m x 2.2m

ATW TRAY EXTA OPTIONS/ACCESSORIES

  • Drivers & passenger side.
    These are fitted with the new air intake design as the ladders do not fit without these.

  • This water tank has an 80L capacity plumbed into a gravity tap.
    This is also pressure filled through tap.

  • Capacity of this water tank is 80L or 125L, this is housed in a stainless-steel case due to location.
    A Spare tyre does not fit up underneath with this tank.

  • Drivers & passenger side

  • 2 x 3m ramps rated for 800kgs total, stored in a slide under the middle of the tray.
    Cannot have the underbody toolbox when these are fitted.

  • This is a new extra we have been fitting next to the rear tail lights, these are switched from the dash as a rear work light. Not linked to reverse lights.

  • An extras option is to raptor black paint the tie rail section and the mudguards to match the powder coated tray sides and head board.

  • We generally fit 3-4 each side just inside of the tray sides.

  • These are removable in a bracket and the bracket can also be unbolted from the tray for a flat surface.
    Each rack includes 2 x pins that are removable.